Waterproof Plywood
- Home
- Waterproof Plywood
Radium Ply
Waterproof Plywood
Waterproof Plywood to be used efficiently in interior spaces like bathrooms, kitchens, patio, etc.waterproofing is essential. There is no other way out, especially in environments where there is excessive moisture. A waterproof ply board is a need of the hour.
BWR here refers to “boiling water-resistant”. This is used for both interiors and exteriors, being treated with phenolic resins to make it water resistant. BWP Boiling waterproof plywood is also referred to as Marine plywood. It is completely waterproof. Being a hundred percent waterproof ply board, it is extremely versatile and durable in nature.
The first consideration should be the use and the location where you’ll use the ply board. Depending on how much water comes into contact with the plywood, and how often the water stays there, and how durable you want your plywood to be.
Radium Ply Conforms To IS:303
| TECHNICAL SPECIFICATION (IS:1659) | ||
|---|---|---|
| Test | Requirement of IS 2202 | Test Result |
| Dimensions & Squareness | Length-Width: +/-5 mm Thickness: +/-1 mm Squareness: 1mm at a length of 500mm |
Length-Width: +/-5 mm Thickness: +/-1 mm/-0.2 mm Squareness: 1mm at a length of 500mm |
| General Flatness | < 6.0 mm | < 4.0 mm |
| Local Planeness | < 0.5 mm | < 0.3 mm |
| Impact Indentation | < 0.2 mm | < 0.2 mm |
| Edge Loading Test | Max Deflection – < 5.0 mm Residual Deflection – < 0.5 mm Lateral Bucking – < 2.0 mm |
Max Deflection – < 3.0 mm Residual Deflection – < 0.3 mm Lateral Bucking – < 1.0 mm |
| Shock Resistance Test | Should with stand 5 impacts | Can with stand 15 impacts |
| Misuse Test | Pass | Excellent |
| End Immersion Test | No delamination in one cycle | Can undergo three cycles without any delamination |
| Knife/Glue Adhesion – Test | Pass | Excellent |
| Screw Withdrawal Resistance | > 1000 N | > 1500 N |
